The new formed steel rolling machine with cantilever arm
baking finish keel roller-mill
colorful board roller moulding machine
new model planer-type formed steel rolling machine
computer controlled hided type house panel machine set
computer controlled YX28-202-820A moulding machine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
The new formed steel rolling machine with cantilever arm
Charts
The flow diagram of operation
Our product:

　　The new formed steel rolling machine with cantilever arm is the ideal equipment to produce lightweight keel, steel liner and cold bending section materials in all kinds. The machine with seven axes, nine axes or twelve axes can roll complex formed steel in all kinds. We can also design and customize the machinery equipments according to your requirements. 　
 
Characteristics of products:

　　1.Quick single side transposal: employing the design of cantilever arm type, we can transpose the

roller in single side quickly according to the requirement of the rolling section to make the operation

convenient and easy. It suits especially to the small and multi-standard output because it can maximum

improve the production efficiency.

　　2.Duplex type tracking fixed ruler cutting: adopting the moving fixed ruler to trigger the cutting.

procedure, one can fix the ruler according to the length of the formed steel. One can choose molding

cutting or non-saw cutting according to the characteristics of the sectional plane of the formed steel
 

　　3.Roller mould assembly: one can assemble the roller mould provided by us on the working surfaces

of the equipment according to the thickness and sectional plane of formed steel. Appropriate usage of

the roller mould assembly can insure the quality of the formed steel.
 
　　4.Non-electrode timing process: our equipment adopts electromagnetic timing construction to make
the course of production better controlled. On the basis of economizing energy sources, we can enhance
production rate, reduce abrasion, improve the quality of the formed steel and prolong the operating
life of the equipments at maximum limit.
 
Major parameter :

　1. The parameter of the cantilever arm formed steel roller machine with seven axes in the new type:

　*The operational height: 741mm.
　*The operational width: 170mm.
　*The thickness of the rolling board: 0.4-1.5mm
　*The operational voltage: 380V 50HZ 　
　*The velocity ratio of the decelerating machine: 1: 31.5 　
　*The speed of drive shaft: 0-46r/min
　*The diameter of the roller wheel: 160mm
　*The weight of principal machine: 2500kg
　*The rapidest operating speed: 23m/min
　*The range of speeds of rotation of the electromagnetic timing electric machine: 0-1440r/min
　*The power of JD type electromagnetic timing electric machine: 5.5KW
　*The power of the electric machine of cutting off vehicle: 1.1KW
　*The rotation speed of the electric machine of cutting off vehicle: 960r/min
　*The outside dimension: 2500〜1250〜1050mm

　2.2. The parameter of the cantilever arm formed steel roller machine with nine axes in the new type:

　*The operational height: 750mm.
　*The operational width: 180mm.
　*The operational voltage: 380V 50HZ
　*The velocity ratio of the decelerating machine: 1: 31.5
　*The speed of drive shaft: 0-46r/min
　*The diameter of the roller wheel: 160mm
　*The weight of principal machine: 2800kg
　*The rapidest operating speed: 23m/min
　*The range of speeds of rotation of the electromagnetic timing electric machine: 0-1440r/min
　*The thickness of the rolling board: within 2mm
　*The power of JD type electromagnetic timing electric machine: 5.5KW
　*The power of the electric machine of cutting off vehicle: 1.1KW
　* The rotation speed of the electric machine of cutting off vehicle: 960r/min
　* The outside dimension: 3060〜1250〜1050mm
 

The make up of the machine set :

The feed table, the delivering table, the cantilever arm roll machine, the tracking cut off machine and the control box of the electric appliance.